MULTI-TASK MACHINING Tooling possibilities H2 Products Toolholder overview H7 Coromant Capto® multi-functional tools CoroPlex™ MT - milling and turning tool CoroPlex™ TT - turning tool CoroPlex™ SL mini-turret H4 H9 H14 CoroTurn® HP - Coromant Capto® tools for High Pressure coolant H21 T-Max® P - holders for negative basic-shape inserts CoroTurn® 107 - holders for positive basic-shape inserts H21 H25 Coromant Capto® tools for general turning CoroTurn® RC - holders for negative basic-shape inserts CoroTurn® 107 - holders for positive basic-shape inserts H15 H17 CoroTurn® TR - Coromant Capto® tools for copy machining CoroTurn® TR - holders for positive basic-shape inserts H19 Adapters CoroTurn® SL adapter for cutting heads CoroTurn® SL70 adapter for cutting heads Adapter for shank tool - radial mounting Adapter for shank tool - axial mounting Mini-turret for shank tool - axial mounting Adapter for shank tool - angular mounting Boring bar adapter H26 H27 H28 H29 H31 H30 H33 MULTI-TASK MACHINING Content H1 A General Turning MULTI-TASK MACHINING Tooling possibilities Multi-Task Machining - tooling possibilities Coromant Capto®– the connecting link to Multi-Task machining Parting and Grooving B Threading C A tool system for multi-task machines has to transmit satisfactory torque levels, be capable of high spindle speeds, have high bending strength and have high precision couplings for repeatability and accuracy with premeasurement or when setting outside the machine Coromant Capto® has a proven record of fulfilling all the requirements and operational demands in multi-task machines involving stationary and rotating tools With its broad program of turning, milling and drilling tools, which use the same self-centering tool coupling for a very broad application area, the system has been successfully installed on all types of multi-task machines Tooling systems G Clamping units for turning Standard turret heads for lathes can easily be converted to the Coromant Capto® modular quick change system by using standard clamping units See page G6 H Multi-task machining CoroPlex™ – Innovative multi-functional tools CoroTurn® SL I General information J To take full advantage of the more versatile multi-task machine tools and to optimize their efficiency, there is now a demand for running them with dedicated tooling CoroPlex™ tools are designed for multitask machining, providing: - accessibility, stability and higher productivity reduced tool changing time saved tool pocket in tool magazine cost reduction - one tool replaces several CoroPlex™ TT twin tools – two turning tools in one The CoroPlex™ TT twin tool is a solution with two turning inserts in one holder, giving the possibility to change operations with just a quick indexing of the tool CoroPlex™ MT – one milling and four turning tools in one CoroPlex™ SL mini-turret – four turning tools in one CoroPlex™ MT is a combination of two winning concepts in one – CoroMill® 390 and CoroTurn® 107 It is either applied rotating as an effective tool for milling applications – or indexed in a number of optional positions for stationary turning, external and internal, using two different CoroTurn® 107 inserts See page A9 For ordering CoroMill 390 inserts, see chapter D, Milling Build your own multi-functional tool by using a Coromant Capto® tool adapter and applying a CoroPlex™ SL mini-turret adapter plate to be combined with four SL cutting heads and blades for turning, threading or grooving operations See page G6 MULTI-TASK MACHINING Tooling possibilites H2 A MULTI-TASK MACHINING General Turning Tooling possibilities Multi-Task Machining - tooling possibilities Turning tools B Parting and Grooving For general turning, the T-Max P system with negative inserts and CoroTurn® 107 with positive inserts form the basis for high productivity turning In parting and grooving, the first choice is the CoroCut® system, while in threading the first choice is the CoroThread® 266 or T-Max U-Lock® system See pages A3, B14, C9 C Milling tools Threading In the CoroMill® family there is always a milling cutter to fit your needs perfectly The CoroMill® family is a multi-purpose milling system for use in applications such as face, shoulder, slot and profile milling See chapter D, Milling Tooling systems G Holemaking tools The drilling and boring program, CoroDrill® and CoroBore®, offers a wide range of high performance holemaking products Regardless of the hole style – we can offer you the right tool for the best productivity in a wide diameter range See chapter E, Drilling and F, Boring Multi-task machining H Tool holders and tool adapters Modern machines and tools put greater demands on toolholders Low runout is required to achieve long tool life Hydro-Grip® meets all the demands on a toolholder Different types of tool adapters are available to help in building a correct tool length See chapter G, Tooling systems in this catalog and Tooling systems in the main catalog for milling and drilling tools CoroTurn® SL I Accessories Sandvik Coromant offers a range of accessory tools for the various coupling sizes, which are strongly recommended for setting important parameters such as spindle orientation, clamping forces, etc See chapter G, Tooling systems in this catalog and Tooling systems in the main catalog for milling and drilling tools MULTI-TASK MACHINING Tooling possibilites H3 General information J A General Turning MULTI-TASK MACHINING Multi-functional tools CoroPlex™ MT CoroPlex™ MT Multi-functional milling and turning tool B Parting and Grooving Many optimized tools in one solution dedicated for multi-task machining as a CoroMill® 390 cutter as a CoroTurn® 107 tool Threading C Shoulder milling Face and longitudinal turning Tooling systems G H Profiling Multi-task machining Circular interpolation in helix I CoroTurn® SL Internal turning Turn-milling J General information ISO application areas: MULTI-TASK MACHINING Multi-functional tools CoroPlex™ MT H4 A MULTI-TASK MACHINING General Turning Multi-functional tools CoroPlex™ MT Multi-functional tools CoroPlex™ MT for milling and turning in Multi-Task machines Parting and Grooving B Coupling size Dimensions, mm, inch C Dc K iC 11 – – – 09 3/8 C5 mm inch 32 Ordering code M-32C5-39011C09D07 zn Dm – 1.260 – 07 11 – 1/4 – C6 32 M-32C6-39011C09D07 35 1.378 35 1.378 – 1.260 – 09 – 07 18 – 3/8 1/4 – C6 40 M-40C6-39018C12D11 35 1.378 35 1.378 – 1.575 – 12 – 11 18 – 1/2 3/8 – C8 40 M-40C8-39018C12D11 43 1.693 43 1.693 – 1.575 – 12 1/2 – 11 3/8 2) 3) l3 f1 ap 50 1.969 50 1.969 50 1.969 63 2.480 63 2.480 63 2.480 63 2.480 63 2.480 63 2.480 80 3.150 80 3.150 80 3.150 130 78.5 – 10 5.118 3.091 77.8 γ1) – ISO λs2) ANSI – R390-11 nmax3) 0° -5° CCMT 09 T3 08 – 394 15.4 – 5.091 3.063 606 77.4 15.4 CCMT (2.5) – 0° -5° DCMT 07 02 04 5.075 3.047 606 165 78.5 – 6.496 3.091 164.3 77.8 77.4 10 – – 15.4 15.4 90.1 – 6.496 3.547 164.4 89.5 – 0° 89.0 – 0° -5° DCMT 07 02 04 19.0 19.2 90.1 89.5 10 – – – 0° 89.0 R390-18 10000 1.7 -5° CCMT 12 04 08 – – CCMT 432 – 0° -5° DCMT 11 T3 04 – DCMT (2.5) 10 – – R390-18 10000 3.3 394 19.0 – 0° -5° CCMT 12 04 08 – 0° -5° DCMT 11 T3 04 7.850 3.524 748 198.9 – DCMT (1.5) 394 7.874 3.547 199.4 – CCMT (2.5) 6.453 3.504 756 200 G 12000 1.7 -5° CCMT 09 T3 08 6.472 3.524 748 163.9 R390-11 394 6.453 3.047 606 165 – DCMT (1.5) 6.469 3.063 606 163.9 U 12000 1.0 19.2 H – CCMT 432 7.831 3.504 756 – DCMT (2.5) γ = Rake angle (valid with flat insert) λs = Angle of inclination nmax (max rev/min) for holders must also be considered Multi-task machining 1) 43 1.693 43 1.693 l1 128.9 -5° Gauge insert D5m 129.3 C Kr = 95° Threading Insert size Kr = 93° -3° Entering angle: Lead angle: Tooling systems Coolant inlet: Axial through the center Limitation on workpiece diameter When turning axially and using the CCMT insert, it may happen that the R390 inserts, because of their position in the tool, limit the workpiece diameter See illustration below I For ordering CoroMill 390 inserts, see chapter D, Milling Max workpiece diameter, Dm mm (inch) CoroTurn® SL Tool diameter, Dc mm (inch) Insert type R390-11 150 (5.906) 380 (14.960 ) CoroMill® 390 inserts are in the main catalog part two, 32 (1.260) chapter D, Milling.40 (1.575) – R390-18 – – Wiper R390-11 100 (3.935) J CMT H5 G6 J2 MULTI-TASK MACHINING Multi-functional tools CoroPlex™ MT H5 General information A44 A General Turning MULTI-TASK MACHINING Multi-functional tools CoroPlex™ MT Multi-functional tools CoroPlex™ MT Spare parts Insert Torque value B Parting and Grooving Type/size ISO-code CCMT 09 CCMT 12 DCMT 07 DCMT 11 R390-11 R390-18 C Threading One tool for both rotating and stationary use Tooling systems G The CoroMill® 390 inserts are positioned a little ahead of the CoroTurn® inserts – axially as well as radially – to guarantee that turning inserts are not in cut when the tool is applied for rotating This means that turning of an available blind hole – using the CoroTurn® function of the tool – must be stopped before the CoroMill® 390 inserts get in contact with the bottom face Multi-task machining H The tool bodies are extended by 65 mm (2.560 inch) compared with corresponding conventional tools to allow freer use of the working positions possible in multi-task machining with no need for extensions The length and design of the tool bodies are optimized by each Coromant Capto® size to provide best accessibility relative to the most common chuck sizes Tools are designed with all inserts positioned on the center line of the tool, making them easy to use with the standard program cycles in the machine tools CoroTurn® SL I Tool length optimized for accessibility in multi-tasking General information J MULTI-TASK MACHINING Multi-functional tools CoroPlex™ MT H6 ANSI-code CCMT (2.5) CCMT 43 DCMT (1.5) DCMT (2.5) R390-11 R390-18 Insert screw 5513 020-09 5513 020-07 5513 020-03 5513 020-09 5513 020-35 5513 020-29 Key (Torx Plus) 5680 046-02 (15IP) 5680 046-06 (20IP) 5680 046-03 (7IP) 5680 046-02 (15IP) 5680 046-01 (8IP) 5680 046-02 (15IP) Nm 3.0 6.4 0.9 3.0 1.2 3.0 ft-lbs 2.2 4.7 0.7 2.2 0.9 2.2 A MULTI-TASK MACHINING General Turning Coromant Capto® cutting units - overview Coromant Capto® cutting units for Multi-Task machining CoroPlex™ TT Twin tool, rigid clamp design Entering angle (Lead angle) 95° (-5°) 93° (-3°) 95° (-5°) T-DCMxxDDMxx 12-16 (1/2-5/8) T-DCMxxDDMxx 15 (1/2) T-DCL.xxDCLxx 12-16 (1/2-5/8) C5-C8 C5-C8 C5-C8 Parting and Grooving B Page H11 H11 H12 C CoroTurn® RC rigid clamp design Entering angle (Lead angle) 95° (-5°) 93° (-3°) 95° (-5°) DCMNN 12-16 (1/2-5/8) DDMNL 15 (1/2) DVMNL 16 (3/8) C5-C8 C5-C8 C8 Page H15 H16 H16 CoroTurn® HP lever design (T-Max P) Entering angle (Lead angle) 95° (-5°) 50° (40°) 93° (-3°) Threading Insert size, mm (iC, inch) Coromant Capto® size G Tooling systems Insert size, mm (iC, inch) Coromant Capto® size PCLNR/L 12 (1/2) PCMNN 12 (1/2) PDJNR/L 15 (1/2) C6 C6-C8 C6 Page H22 H22 H23 CoroTurn® HP lever design (T-Max P) Entering angle (Lead angle) 45° (45°) I CoroTurn® SL Insert size, mm (iC, inch) Coromant Capto® size Multi-task machining H Page PSSNR/L 12 (1/2) J C6 H24 MULTI-TASK MACHINING Coromant Capto® cutting units - overview H7 General information Insert size, mm (iC, inch) Coromant Capto® size A General Turning MULTI-TASK MACHINING Coromant Capto® cutting units - overview Coromant Capto® cutting units for Multi-Task machining CoroTurn® 107 screw Entering angle (Lead angle) clamp design 95° (-5°) - 95° (-5°) SCMCN 12 (1/2) SRDCN 10-16 (.394-.630) SVMBL 16 (3/8) C6 C6 C5-C6 H17 H17 H18 Parting and Grooving B C Insert size, mm (iC, inch) Coromant Capto® size Page Threading CoroTurn® HP screw Entering angle (Lead angle) design (CoroTurn® 50° (40°) 107) G Insert size, mm (iC, inch) Coromant Capto® size Tooling systems Page SVMBR/L 16 (3/8) C6 H25 CoroTurn® TR screw Entering angle (Lead angle) clamp design 93° (-3°) 95° (-5°) Multi-task machining H D13MCL 13 V13MBL 13 Coromant Capto® size C5-C6 C5-C6 Page H19 H20 Insert size, mm (inch) CoroTurn® SL I General information J MULTI-TASK MACHINING Coromant Capto® cutting units - overview H8 A General Turning MULTI-TASK MACHINING CoroPlex™ TT Multi-functional turning tool B Parting and Grooving Two turning tools in one dedicated for multi-task machining CoroPlex™ TT twin tool combines two tool holders in one: - Reduce tool changing time - Save tool pockets in the tool magazine - Flexible tool holders with optimized length, stability and coolant solution for multi-task machines - CoroTurn® RC insert clamping system with wide flexibility - One holder replaces two - cost reduction Threading C G Tooling systems To apply the twin tool, move the Y-axis the distance h1, so that the insert will cut on the center line of the workpiece When working against a sub-spindle, the Y-axis must be offset in the opposite direction in relation to the main spindle H 45° CoroTurn® 107 single tool 45° CoroTurn® RC single tool 45° CoroPlex™ TT 45° CoroPlex™ TT twin tool twin tool Multi-task machining Flexibility with Multi-Task machining 0° CoroPlex™ TT twin tool CoroTurn® SL I MULTI-TASK MACHINING H9 J General information 90° CoroPlex™ TT twin tool A General Turning MULTI-TASK MACHINING Coromant Capto® cutting units Code key for CoroPlexTM TT twin tools Parting and Grooving B Threading C G Coupling size mm, inch C = Coromant Capto® D5m = Coupling size C3 C4 C5 C6 C8 Type of tool T = Twin tool D D5m = 32 (1.260) D5m = 40 (1.575) D5m = 50 (1.969) D5m = 63 (2.480) D5m = 80 (3.150) C Top and hole clamping (RC) CoroTurn® RC D L 95° (-5°) and 10 Insert size M 50° (40°) Entering angle (Lead angle) 12 Tool length, l1 11 Hand of tool R Feed L Feed N Feed Multi-task machining H CoroTurn® SL I J General information and Insert shape Coromant Capto® and Holder style Tooling systems and Clamping system MULTI-TASK MACHINING Coromant Capto® cutting units H 10 Feed A General Turning MULTI-TASK MACHINING Coromant Capto® cutting units Coromant Capto® cutting units CoroTurn® TR screw clamp design TR-Cx-V13MBL κr 50° 40° Entering angle: Lead angle: Parting and Grooving B C Coolant inlet: Axial through the center Left hand style shown Dimensions, millimeter, inch (mm, in.) Threading Dm2 Main application M 13 Ordering code TR-C5-V13MBL-00115 TR-C6-V13MBL-00130 D5m D5m mm in mm.4) 50 1.968 150 63 2.480 150 Dm2 f1 in.4) mm 5.905 5.905 f1 in 0 Gauge inserts l1 l1 mm in 115 4.527 130 5.118 γ1) 0° 0° λs2) 0° 0° U ISO 0.8 TR-VB1308 1.6 TR-VB1308 ANSI TR-VB1308 TR-VB1308 Nm3) 2.0 2.0 G 1) 2) 3) Tooling systems 4) H γ = Rake angle (valid with flat insert) λs = Angle of inclination Insert tightening torque, Nm Valid in combination with clamping unit R/LC2090 L = Left hand For more information about CoroTurn TR system, see chapter A page A175 Main spare parts Insert size M Insert screw 5513 020-64 Key (Torx Plus) 5680 049-04 (10IP) Torque wrench 5680 100-05 Multi-task machining 13 CoroTurn® SL I J General information A9 MULTI-TASK MACHINING Coromant Capto® cutting units H 20 A378 G6 A2 J2 A MULTI-TASK MACHINING General Turning Coromant Capto® cutting units CoroTurn® HP Coromant Capto tools for High Pressure coolant B Increased cutting speed for rough to medium machining Parting and Grooving Chip control in finishing - secure unmanned production When to use Any turning machine where both high pressure coolant and Coromant Capto® coupling are available: - Multi-task machines - Vertical turning lathes (VTL) - Turning centers A directional jet for maximum effect H Coolant Basic form Hydraulic wedge effect I Plastic deformation Jet nozzles CoroTurn® SL The principle of turning with high pressure coolant is to accurately position the jet of coolant through small, sighted nozzles (dia 039 inch) to give a parallel laminar flow This high velocity jet of coolant creates a hydraulic wedge between the top surface of the insert and the underside of the chip being removed from the component The coolant jet has three main effects: To provide localized cooling of the insert in the contact zone (A) To force the chip away from the insert face quickly, reducing wear on the insert (B) To help break the chip into smaller pieces and evacuate it from the cutting area G Multi-task machining The high pressure coolant application with CoroTurn HP utilizes carefully developed nozzle technology based on decades of experience Optimized nozzles give parallel laminar jets of coolant with high velocity accurately directed at the right place on the insert The precision and character of these jets makes the difference CoroTurn HP has fixed, pre-directed, high precision nozzles mounted on the tool targeting the right place, at the right angle on the cutting edge No setting with trials is needed; performance and security is built-in with only normal tool maintenance required Tooling systems Fixed coolant nozzle technology The characteristic reduced depth of cut and reduced feed rate in finishing operations always leads to challenges for chip control In automated production, be it high volume mass production or machines with automatic tool changing (multi-task and vertical turning lathes), any chips gathering around the tool will result in costly machine stoppages This new technology will provide you with total chip control, giving security in unmanned production Threading C J CoroTurn HP tools for general turning, see page A110 MULTI-TASK MACHINING Coromant Capto® cutting units H 21 General information CoroTurn HP with SL coupling, see page I12 A General Turning MULTI-TASK MACHINING Coromant Capto® cutting units CoroTurn® HP cutting units Lever design With high pressure coolant Entering angle: Lead angle: Cx-PCMNN-HP κr 50° (95°) -5° Parting and Grooving B Cx-PCLNR/L-HP κr 95° -5° C Coolant inlet: Axial through the center Neutral Right hand style shown Threading Dimensions, mm, inch K Main application iC Ordering code 12 1/2 C6-PCLNR/L-45165-12HP 63 Dm1 min4) 110 f1 l1 45.0 165.0 γ1) -6° λs2) -6° U ISO 3.5 CNMG 12 04 08 ANSI CNMG 432 Nm3) 5.0 2.480 4.331 1.772 6.496 G Tooling systems D5m Gauge inserts Dimensions, mm, inch K Main application iC D5m Ordering code 12 1/2 C6-PCMNN-00115-12HP 63 Dm2 min4) 110 2.480 4.331 H C8-PCMNN-00150-12HP 80 315 Gauge inserts f1 l1 0.0 115.0 γ1) -6° λs2) -6° U ISO 1.8 CNMG 12 04 08 ANSI CNMG 432 Nm3) 5.0 -6° -6° 3.8 CNMG 12 04 08 CNMG 432 5.0 000 4.528 0.0 150.0 Multi-task machining 3.150 12.402 000 5.906 1) 2) 3) 4) γ = Rake angle (valid with flat insert) λs = Angle of inclination Insert tightening torque, Nm Valid in combination with clamping unit R/LC2090 N = Neutral, R = Right hand, L = Left hand Main spare parts Insert size I iC 12 1/2 Lever 174.3-841M Screw 174.3-821 Key (mm) 174.1-864 (3.0) Shim 171.31-850M Nozzle (hole dia mm.) 5691 026-03 (1.0) CoroTurn® SL K J General information A9 MULTI-TASK MACHINING Coromant Capto® cutting units H 22 A378 G6 A2 J2 Plug 3214 010-253 A MULTI-TASK MACHINING General Turning Coromant Capto® cutting units CoroTurn® HP cutting units Lever design With high pressure coolant Cx-PDJNR/L-HP κr 93° -3° Cx-PDMNR/L-15HP κr 48° (93°) 42° (-3°) B Parting and Grooving Entering angle: Lead angle: C Coolant inlet: Axial through the center Right hand style shown F Main application iC Ordering code 15 1/2 C6-PDJNR/L-45165-15HP Dm1 D5m 95 63 f1 Gauge inserts l1 45.0 165.0 γ1) -6° λs2) -7° U ISO 3.5 DNMG 15 06 08 ANSI DNMG 442 Threading Dimensions, mm, inch Nm3) 5.0 2.480 3.740 1.772 6.496 G F iC Ordering code 15 1/2 C6-PDMNR/L-00130-15HP Main application D5m f1 l1 63 0.6 130.0 2.480 022 5.118 Gauge inserts γ1) -5° λs2) -15° U 2.0 ISO DNMG 15 06 08 ANSI DNMG 442 Tooling systems Dimensions, mm, inch Nm3) 5.0 H 2) 3) 4) γ = Rake angle (valid with flat insert) λs = Angle of inclination Insert tightening torque, Nm Valid in combination with clamping unit R/LC2090 N = Neutral, R = Right hand, L = Left hand Multi-task machining 1) Main spare parts Insert size I iC 1/2 Lever 174.3-847M Screw 174.3-830 Key (mm) 174.1-864 (3.0) Shim 171.35-851M Nozzle (hole dia mm.) 5691 026-03 (1.0) CoroTurn® SL F 15 J A378 G6 A2 J2 MULTI-TASK MACHINING Coromant Capto® cutting units H 23 General information A9 A General Turning MULTI-TASK MACHINING Coromant Capto® cutting units CoroTurn® HP cutting units Lever design With high pressure coolant Cx-PSSNR/L-HP κr 45° 45° Entering angle: Lead angle: Parting and Grooving B C Threading Coolant inlet: Axial through the center Right hand style shown Dimensions, mm, inch J Main application Tooling systems G H iC Ordering code D5m 12 1/2 C6-PSSNR/L-45156-12HP 63 Dm1 min4) f1 110 45.0 f1s 36.7 Gauge inserts l1 l1s 156 164.3 γ1) -8° λs2) 0° U ISO ANSI 3.38 SNMG 12 04 08 SNMG 432 2.480 4.331 1.772 1.445 6.142 6.468 1) 2) 3) 4) γ = Rake angle (valid with flat insert) λs = Angle of inclination Insert tightening torque, Nm Valid in combination with clamping unit R/LC2090 N = Neutral, R = Right hand, L = Left hand Main spare parts Multi-task machining Insert size J iC 12 1/2 Lever 174.3-841M Screw 174.3-821 Key (mm) 174.1-864 (3.0) Shim 174.3-851M CoroTurn® SL I J A9 General information Nm3) 5.0 MULTI-TASK MACHINING Coromant Capto® cutting units H 24 A378 G6 A2 J2 Nozzle (hole dia mm.) 5691 026-03 (1.0) A MULTI-TASK MACHINING General Turning Coromant Capto® cutting units CoroTurn® HP cutting units Screw clamp design With high pressure coolant Cx-SVMBR/L-HP κr 50° 40° B Parting and Grooving Entering angle: Lead angle: C Coolant inlet: Axial through the center Right hand style shown M iC Ordering code 16 3/8 C6-SVMBR/L-00130-16HP Main application D5m 63 Dm2 min4) 145 Gauge inserts f1 l1 130 γ1) 0° λs2) ISO 0° 1.84 VBMT 16 04 08 ANSI VBMT 332 Nm3) VBMT 16 04 08 VBMT 332 U 2.480 5.709 000 5.118 Threading Dimensions, mm, inch G 2) 3) 4) γ = Rake angle (valid with flat insert) λs = Angle of inclination Insert tightening torque, Nm Valid in combination with clamping unit R/LC2090 N = Neutral, R = Right hand, L = Left hand Tooling systems 1) Main spare parts Insert size iC 16 3/8 Insert screw (thread) 5513 020-01 (M3.5) Key (Torx Plus) 5680 049-01 (15IP) Shim 5322 270-01 Shim screw 5512 090-01 Key (mm) 5680 049-01 (3.5) H Nozzle (hole dia mm.) 5691 026-03 (1.0) Multi-task machining M CoroTurn® SL I J A378 G6 A2 J2 MULTI-TASK MACHINING Coromant Capto® cutting units H 25 General information A9 A General Turning MULTI-TASK MACHINING CoroTurn® SL CoroTurn® SL Coromant Capto® adapter Coromant Capto® 45° Parting and Grooving B C Coolant inlet: Axial through the center Right hand style shown Coupling size dmt mm Threading Cx-570- RX-045-L1 32 32 40 40 Dimensions, millimeter, inch (mm, in.) D1 Ordering code C5-570-32-RX-045-L1 C6-570-32-RX-045-L1 C6-570-40-RX-045-L1 C8-570-40-RX-045-L1 mm 40 45 45 50 D1 D5m D5m f1 f1 in mm in mm in 1.574 50 1.968 0.078 1.771 63 2.480 0.078 1.771 63 2.480 0.078 1.969 80 3.149 0.196 Main spare parts Coromant Capto® Cx-570-32-RX-045-L1 Cx-570-40-RX-045-L1 Tooling systems l1 in 3.543 3.937 3.937 5.315 U 1.1 1.7 1.8 3.7 R = Right hand, L = Left hand G Screw 3212 010-308 3212 010-358 For complete assortment see page I68 Multi-task machining H CoroTurn® SL I J G6 General information l1 mm 90 100 100 135 MULTI-TASK MACHINING CoroTurn® SL H 26 J2 Key (mm) 3021 010-040 (4.0) 3021 010-050 (5.0) Plug 5643 045-01 5643 045-01 A MULTI-TASK MACHINING General Turning CoroTurn® SL CoroTurn® SL70 Coromant Capto® adapter Coromant Capto® 45° Parting and Grooving B Coolant inlet: Axial through the center C With internal coolant supply Right hand style shown Coupling size, mm Ordering code C6-SL70-RX-045-100 Shank style 45° bc D5m f1 l1 U 70 63 100 2.7 2.480 197 3.937 2.7 Threading Type Dimensions, mm, inch For complete assortment see page I103 Tooling systems G Multi-task machining H CoroTurn® SL I J J2 MULTI-TASK MACHINING CoroTurn® SL H 27 General information C2 A General Turning MULTI-TASK MACHINING Coromant Capto® adapters Adapters for shank tools Radial mounting ASHA C6-ASHA-50071-32 Parting and Grooving B C Metric version Coolant inlet: Axial through the center Neutral style shown Dimensions Threading Coupling size C5 C6 C8 C10 Ordering code C5-ASHA-38058-20M C6-ASHA-38060-20M C6-ASHA-45071-25M C6-ASHA-50071-32M C8-ASHA-55085-32M C10-ASHA-55090-32 D1 D5m b21 b22 h21 h23 l1 l21 U 90 90 110 130 142 145 50 63 63 63 80 100 38 38 45 50 55 55 23 23 30 45 45 55 65 65 65 20 20 25 32 32 32 38 40 45 45 53 58 58 60 71 71 85 90 1.4 1.7 2.6 3.2 4.6 5.7 40 40 G Radial mounting ASHA-U Tooling systems ASHA-A Multi-task machining H Inch version Coupling size C4 C5 C6 C8 Ordering code C4-ASHA-25046-10U C5-ASHA-30055-12U C5-ASHA-38057-12-AM C6-ASHA-38059-12-AM C6-ASHA-38066-12U C8-ASHA-55085-20-AM D1 D5m b21 3.543 3.543 5.118 5.591 1.575 1.968 1.968 2.480 2.480 3.150 984 1.181 1.496 1.496 1.496 2.165 b22 581 906 906 591 1.575 Warning! The adapters are designed for automatic tool change Make sure that there is no risk of interference in the magazine and tool changing cycle J H32 General information Neutral style shown Dimensions, inch I CoroTurn® SL Coolant inlet: Axial through the center MULTI-TASK MACHINING Coromant Capto® adaptors H 28 G6 J2 h21 h23 l1 l21 V 1.772 1.772 625 750 750 750 750 1.250 1.180 1.380 1.457 1.575 1.580 2.087 1.810 2.150 2.244 2.323 2.340 3.337 2.20 2.93 3.02 3.75 5.11 10.14 2.559 A MULTI-TASK MACHINING General Turning Coromant Capto® adapters Adapters for shank tools Axial mounting ASHR/L ASHS Parting and Grooving B C Coolant inlet: Axial through the center Coupling size C5 C6 C8 C6 Right hand style Dimensions Ordering code C5-ASHR/L-30098-20 C6-ASHR/L-30100-20 C6-ASHR/L-38130-25 C8-ASHR/L-40140-32 C6-ASHS-58115-32 Neutral style D1 D5m b21 b22 f h21 h22 h23 l21 l22 l23 l24 U 90 90 110 110 140 50 63 63 80 63 29 29 32 40 58 30 30 38 40 10 10 13 33 41 41 50 55 33 33 33 30 20 20 25 32 32 98 100 130 140 115 88 90 112 130 20 22 22 30 22 23 25 28 35 2.5 2.5 3.4 5.1 7.3 Threading Metric version R = Right hand, L = Left hand G Axial mounting ASHS-U Tooling systems ASHR/L Multi-task machining H Coolant inlet: Axial through the center Coupling size C5 C6 C8 C5 C6 Right hand style Dimensions, inch Ordering code C5-ASHR/L-30098-12-A C6-ASHR/L-30100-12-A C6-ASHR/L-38130-16-A C8-ASHR/L-40140-20-A C5-ASHS-47088-12U C6-ASHS-54090-12U Neutral style D1 D5m b21 b22 f h21 h22 h23 l21 l22 l23 l24 V 3.543 3.543 4.331 4.331 1.968 2.480 2.480 3.150 1.968 2.480 1.142 1.142 1.260 1.575 1.831 2.106 1.181 1.181 1.496 1.575 1.060 1.340 431 431 496 325 1.614 1.614 1.968 2.165 1.299 1.299 1.299 1.181 750 750 1.000 1.250 750 750 3.858 3.937 5.118 5.512 3.465 3.543 3.465 3.543 4.409 5.118 787 866 866 1.181 906 984 1.102 1.378 4.67 5.29 7.50 11.84 6.83 2.20 I R = Right hand, L = Left hand CoroTurn® SL Inch version J G6 J2 MULTI-TASK MACHINING Coromant Capto® adaptors H 29 General information H32 A General Turning MULTI-TASK MACHINING Coromant Capto® adapters Adapters for shank tools Angular mounting Normal use is a left hand cutting tool in a right hand adapter Parting and Grooving B Coolant inlet: Axial through the center C Metric version Right hand style shown Dimensions Threading Coupling size C5 C6 C8 G Ordering code C5-ASHR/L45-36097-20 C6-ASHR/L45-36099-20 C8-ASHR/L45-50135-32 D1 D5m b21 f h21 h22 l21 U 72 72 140 50 63 80 30.6 31.5 45 15 15 17 20 20 32 26 28 40 97 99 135 1.7 2.2 6.5 Inch version Dimensions, inch Coupling size C5 C6 C8 Ordering code C5-ASHR/L45-36097-12-A C6-ASHR/L45-36099-12-A C8-ASHR/L45-50135-20-A D1 D5m b21 f h21 h22 l21 V 2.835 2.835 5.512 1.968 2.480 3.150 1.205 1.224 1.772 618 618 677 750 750 1.250 1.024 1.102 1.575 3.791 3.870 5.307 3.75 4.83 14.99 Tooling systems R = Right hand, L = Left hand Multi-task machining H CoroTurn® SL I J Adapter for CoroCut® and T-Max Q-Cut® parting blades See page B33 General information H32 MULTI-TASK MACHINING Coromant Capto® adaptors H 30 G6 J2 A MULTI-TASK MACHINING General Turning Coromant Capto® adapters Mini-turret for shank tools Axial mounting ASHR/L3 Parting and Grooving B Coolant inlet: Axial through the center Metric version Right hand style shown Dimensions Coupling size C5 C6 C8 Ordering code C5-ASHR/L3-36123-20 C6-ASHR/L3-36125-20 C8-ASHR/L3-45150-32 C D1 D5m f h23 l21 l23 l24 U 90 90 120 50 63 80 16 16 20 20 20 32 123 125 150 20 22 30 26 28 36 3.4 3.8 7.5 Threading Inch version Dimensions, inch Coupling size C5 C6 C8 Ordering code C5-ASHR/L3-36123-12-A C6-ASHR/L3-36125-12-A C8-ASHR/L3-46150-20-A D1 D5m f h23 l21 l23 l24 V 3.543 3.543 4.724 1.968 2.480 3.150 614 614 811 750 750 1.250 4.842 4.921 5.906 787 866 1.181 1.024 1.102 1.417 7.85 8.16 17.01 G R = Right hand, L = Left hand Tooling systems Warning! The adapters are designed for automatic tool change Make sure that there is no risk of interference in the magazine and tool changing cycle Multi-task machining H CoroTurn® SL I J Adapter for CoroCut® and T-Max Q-Cut® parting blades See page B33 G6 J2 MULTI-TASK MACHINING Coromant Capto® adaptors H 31 General information H32 A General Turning MULTI-TASK MACHINING Coromant Capto® adapters Spare parts Radial mounting Coolant nozzle − − 5691 029-09 − 5691 029-09 5691 029-09 5691 029-09 5691 029-09 5691 029-09 5691 029-09 5691 029-09 5691 029-09 Valve bolt O-ring Circlip 5692 035-04 5641 005-79 3421 105-015 5692 035-04 5692 035-04 5692 035-04 5692 035-04 5692 035-04 5692 035-04 5692 035-04 5692 035-04 5641 005-79 5641 005-79 5641 005-79 5641 005-79 5641 005-79 5641 005-79 5641 005-79 5641 005-79 3421 105-015 3421 105-015 3421 105-015 3421 105-015 3421 105-015 3421 105-015 3421 105-015 3421 105-015 B Parting and Grooving C4-ASHA-25046-10U C5-ASHA-30055-12U C5-ASHA-38057-12-AM C6-ASHA-38066-12U C6-ASHA-38059-12-AM C8-ASHA-55085-20-AM C5-ASHA-38058-20M C6-ASHA-38060-20M C6-ASHA-45071-25M C6-ASHA-50071-32M C8-ASHA-55085-32M C8X-ASHA-55090-32M C Screw 3214 010-408 3214 010-408 3214 020-461 3214 010-459 3214 020-411 3214 020-512 3214 020-461 3214 020-411 3214 040-462 3214 040-462 3214 020-512 3214 020-512 NPT 1/8 1/8 1/8 Axial mounting Threading Cx-ASHA/ASHS C5-ASHS-47088-12U C5-ASHR/L-30098-12-A C5-ASHR/L-30098-20 C6-ASHS-54090-12U C6-ASHR/L-30100-12-A C6-ASHR/L-38130-16-A C6-ASHR/L-30100-20 C6-ASHR/L-38130-25 C6-ASHR/L-40140-32 C6-ASHS-58115-32 C8-ASHR/L-40140-20-A C8X-ASHR/L-50143-32 G Tooling systems Multi-task machining C5-ASHR/L3-36123-12-A C5-ASHR/L3-36123-20 C6-ASHR/L3-36125-12-A C6-ASHR/L3-36125-20 C8-ASHR/L3-48150-12-A C8-ASHR/L3-45150-32 1/8 Coolant nozzle − 5691 029-10 5691 029-10 − 5691 029-10 5691 029-10 5691 029-10 5691 029-10 5691 029-10 5691 029-09 5691 029-10 5691 029-10 Screw 3214 020-512 3214 020-512 3214 020-512 3214 020-512 3214 020-512 3214 020-512 Coolant nozzle 5691 029-09 5691 029-09 5691 029-09 5691 029-09 5691 029-10 5691 029-10 Screw 3214 020-461 3214 020-461 3214 020-411 3214 020-461 3214 020-512 3214 020-512 Coolant nozzle 5691 029-09 5691 029-09 5691 029-09 5691 029-09 5691 029-09 5691 029-09 Angular mounting Cx-ASHR45 CoroTurn® SL C5-ASHR/L45-36097-12-A C5-ASHR/L45-36097-20 C6-ASHR/L45-36099-12-A C6-ASHR/L45-36099-20 C8-ASHR/L45-50135-20-A C8-ASHR/L45-50135-32 J General information NPT 1/8 Cx-ASHR/L3 H I Screw 3214 010-408 3214 020-461 3214 020-461 3214 010-408 3214 020-411 3214 020-512 3214 020-461 3214 020-512 3214 020-512 3214 040-462 3214 020-512 3214 020-512 MULTI-TASK MACHINING Coromant Capto® adaptors H 32 A MULTI-TASK MACHINING General Turning Coromant Capto® adapters Boring bar adapters for Multi-Task machining B Parting and Grooving Technical information: C = Coolant goes straight through the center L = Left coolant nozzle will get coolant R = Right coolant nozzle will get coolant C l1 = programming length Coolant inlet: Axial through the center Dimensions, millimeter, inch (mm, in.) C8 Ordering code C5-131-00100-25 C6-131-00098-25 C6-131-00112-40 C8-131-00098-25 C8-131-00112-40 dmt dmt D1 D1 D5m D5m l1 l1 l3 l3 l21 l21 mm 25 25 40 25 40 in 0.984 0.984 1.574 0.984 1.574 mm 63 63 80 63 80 in 2.480 2.480 3.149 2.480 3.149 mm 50 63 63 80 80 in 1.968 2.480 2.480 3.149 3.149 mm 43 41 41 41 41 in 1.692 1.614 1.614 1.614 1.614 mm 80 in 3.149 90 50 3.543 1.968 mm 100 98 112 98 112 in 3.937 3.858 4.409 3.858 4.409 U Threading Coupling size C5 C6 2.0 2.4 3.5 3.4 4.3 G C5-131-00100-25 C6-131-00098-25 C6-131-00112-40 C8-131-00098-25 C8-131-00112-40 Valve bolt 5692 035-03 5692 035-01 5692 035-01 5692 035-02 5692 035-02 Screw 5514 012-02 5514 012-02 5514 012-01 5514 012-02 5514 012-01 Coolant nozzle 5691 029-09 5691 029-09 5691 029-10 5691 029-09 5691 029-10 O-ring 5641 005-06 5641 005-06 5641 005-06 5641 005-06 5641 005-06 Circlip 3421 105-020 3421 105-020 3421 105-020 3421 105-020 3421 105-020 Screw 3214 010-355 (DIN913-M6x6-45H) 3214 010-355 (DIN913-M6x6-45H) 3214 010-355 (DIN913-M6x6-45H) 3214 010-355 (DIN913-M6x6-45H) 3214 010-355 (DIN913-M6x6-45H) Spring plunger Key 5514 064-01 3021 010-080 (DIN911-8) 5514 064-01 3021 010-080 (DIN911-8) 5514 064-01 3021 010-100 (DIN911-10) 5514 064-01 3021 010-080 (DIN911-8) 5514 064-01 3021 010-100 (DIN911-10) H Screw 3214 010-406 3214 010-406 Multi-task machining C5-131-00100-25 C6-131-00098-25 C6-131-00112-40 C8-131-00098-25 C8-131-00112-40 Tooling systems Spare parts 3214 010-406 3214 010-406 3214 010-406 I CoroTurn® SL For cylindrical sleeves, see page A304 J MULTI-TASK MACHINING Coromant Capto® adaptors H 33 General information G6